Specifications
Call/Fax: 330-630-9025

E-Mail: mconway@ussafetygear.com       Ordering Sheet

Home Up

BLOWER MOTOR SPECIFICATIONS

MODEL MOTOR SPECIFICATIONS CFM
FREE AIR
CFM
W/DUCT
WEIGHT STANDARD BLOWER
TECHNICAL FEATURES
SVB-E8
1-speed electric
HP - 115 VAC 12 amp pre-wired
TEFC motor - installed GFI cord
1570 1047 53 lbs.
  • Solid rubber isolation mounts on all models
  • Steel welded safety guards on intake and exhaust
  • Thermal overload protectors on all electric models
  • All steel housing, frame, and carry handle - shaft guard standard
  • Universal frame and housing for all models - modular components
  • All aluminum non-sparking blower wheels
  • Blower wheels dynamically balanced to 3000 rpm
  • Ribbed 8-inch flanges on intake and exhaust to accommodate standard 8 inch ducting
  • Continuous duty electric motor - CSA approved
  • CSA approved electric blowers
  • TEFC farm duty electric motor - dual voltage rated - 115/230 VAC
  • Motor temperature rating - 30F to 105F
  • Gasketed capacitor cover
  • Designed for use in severe conditions
SVB-E8-2
2-speed electric
HP - 115 VAC - 12 amp - 2 speed TEFC motor, low 1140 rpm, high 1725 rpm, built-in GFI on/off power cord 750 LOW

1570 HIGH

490 LOW

1047 HIGH

64 lbs.
SVB-E8EC
Economy
Electric
HP - 115 VAC - 7.9 amps - 60 Hz pre-wired with GFI on/off power cord 1390 973 37 lbs.
SVB-E8EXP
Explosion-Proof
UL and CSA
listed motor
HP - 115 VAC - 12 amp, factory wired with 25 ft. cord, no plug, explosion-proof Class I, Div. 1, Groups C and D, Class II, Div. 1, Groups E, F, G 1570 1047 79 lbs.
SVB-G8
Gasoline
SVB-G8-H
(Honda)
3.5 HP Briggs & Stratton - gasoline engine with 5 ft. remote flexible steel exhaust host and custom gas-tight muffler MIN 1500

 
MIN 1040 47 lbs.
SVB-G8P
Propane
3.5 HP Briggs & Stratton w/propane conversion unit installed  - 5 ft. remote flexible steel exhaust host supplied MIN 1500

MAX 3000
MIN 1040

MAX 1725

47 lbs.
SVB-A8
Pneumatic (air driven) Intrinsically Safe
4 HP pneumatic air motor In-Line particulate/water filter w/drain, 2nd stage in-line lubricator, operating inlet pressures from 10-90 psi, operating inlet flow requirements 5-30 cfm.  Adjustable air inlet pressure regulator with pressure gauge special low-noice muffler - under 80 dbA 1500 @
Minimum
psi and cfm

3000 @
Maximum
psi and cfm

1040 @
Minimum
psi and cfm

1725 @ Maximum
psi and cfm

50 lbs.

Go back

Home Up Absorbents Cases Clothing Communications Confined Space Containment Cooling Decontamination Electrical Fall Protection First Aid/Multi-Casualty First Receivers Flashlights Foot Protection Gas Detection Goggles/Shields/Glasses Hand Cleaning Hand Protection Head Protection HEPA Vacuums Respiratory Signs Test Kits Water Rescue/Work Table of Contents First Responders