Testing Products
Call/Fax: 330-630-9025

E-Mail: mconway@ussafetygear.com       Ordering Sheet

Home Up

Training Products & Test Kits  

Fit Test Apparatuses and Accessories

3M equipment and procedures provide a simple, direct way to meet OSHA qualitative fit testing requirements.  These products can be used with any particulate or gas/vapor respirator with a particulate filter to test face-to-respirator seal. 

The equipment helps satisfy respiratory program

requirements, and is easy to use during respiratory training.

The fit test works by spraying a sweet or bitter solution into the hood environment.  If the wearer does not detect the test agent's taste, an acceptable fit has been demonstrated.

Irritant Smoke Test Kit
Model # 500
This kit allows the operator to test air flows in workplaces accurately and easily.  Just break off both ends of a No. 501 smoke generation tube (6 tubes/box) and connect the tube to the rubber bulb.  Squeezing the bulb provides atmospheric moisture that reacts with the reagent in the tube, generating a white smoke.  A single No. 501 tube can be used repeatedly for 50 to 100 tests by sealing the tube ends with the rubber caps after each test.
500

Go back

Home Up Absorbents Cases Clothing Communications Confined Space Containment Cooling Decontamination Electrical Fall Protection First Aid/Multi-Casualty First Receivers Flashlights Foot Protection Gas Detection Goggles/Shields/Glasses Hand Cleaning Hand Protection Head Protection HEPA Vacuums Respiratory Signs Test Kits Water Rescue/Work Table of Contents First Responders